Booster Type; High Back Type; Booster Seat - Lexus LC500 Manual

52
1-2. Child safety
child restraint system is securely in
place.
After the shoulder belt has retracted to a
point where there is no slack in the belt,
pull the belt to check that it cannot be
extended.
7 After installing the child restraint
system, rock it back and forth to
ensure that it is installed securely.
(P.53)

Booster seat

■
1 If installing the child restraint sys-
tem to the front passenger seat is
unavoidable, refer to P.48 for front
passenger seat adjustment.
2
High back type: If the head restraint
interferes with the child restraint
system installation, put the head
restraint in the upper most position.
(P.116)
3
Place the child restraint system on
the seat facing the front of the vehi-
cle.

Booster type



High back type


4
Sit the child in the child restraint
system. Fit the seat belt to the child
restraint system according to the
manufacturer's instructions and
insert the plate into the buckle.
Make sure that the belt is not
twisted.
Check that the shoulder belt is correctly
positioned over the child's shoulder and
that the lap belt is as low as possible.
(P.25)