Instrument Panel Brightness Adjustment; Outside Temperature Display; Liquid Crystal Display; Changing Between The Odometer And Trip Meter - Lexus LC500 Manual

Hide thumbs Also See for LC500:
Table of Contents

Advertisement

Instrument panel brightness adjustment

The brightness of the instrument panel
lights is automatically adjusted based on the
light sensor detecting how bright the sur-
roundings are.

Outside temperature display

In the following situations, the correct
outside temperature may not be dis-
played, or the display may take longer
than normal to change.
• When stopped, or driving at low speeds
(less than 12 mph [20 km/h])
• When the outside temperature has
changed suddenly (at the entrance/exit
of a garage, tunnel, etc.)
When "- -" or "E" is displayed, the system
may be malfunctioning.
Take your vehicle to your Lexus dealer.
Speed unit setting for the speedometer
When the speed unit has been changed
from the default setting, the vehicle speed in
the default unit is also displayed in the
meter.
Pop-up display
In some situations, such as when a switch
operation is performed, a pop-up display
will be temporarily displayed on the
multi-information display.
Some pop-up displays can be set on/off.
(P.83)
2-1. Instrument cluster

Liquid crystal display

Small spots or light spots may appear on the
display. This phenomenon is characteristic
of liquid crystal displays, and there is no
problem continuing to use the display.
Customization
The meter display can be customized on
the multi-information display. (P.367)
NOTICE
To prevent damage to the engine and
its components
Do not let the indicator of the tachom-
eter enter the red zone, as it rep-
resents the engine speed range which
exceeds the maximum safe engine
speed.
In the following situations, the engine
may be overheating. In this case,
immediately stop the vehicle in a safe
place, and check the engine after it has
cooled completely. (P.345)
• The engine coolant temperature
gauge is in the red zone (H).
• The engine oil temperature gauge is in
the red zone (H).
Changing between the odome-
ter and trip meter
The odometer and trip meter displays
can be switched. When the trip meter
is displayed, pressing and holding the
button will reset the trip meter.
77
2

Advertisement

Table of Contents
loading

Table of Contents