332
7-2. Steps to take in an emergency
setting, the engine switch will turn to ACC.
3
Firmly depress the brake pedal and
check that
multi-information display.
4
Press the engine switch.
In the event that the engine still cannot
be started, contact your Lexus dealer.
Stopping the engine
■
Set the parking brake, shift the shift position
to P and press the engine switch as you nor-
mally do when stopping the engine.
Electronic key battery
■
As the above procedure is a temporary
measure, it is recommended that the elec-
tronic key battery be replaced immediately
when the battery is depleted. (P.297)
■
Alarm (For Canada)
Using the mechanical key to lock the doors
will not set the alarm system.
If a door is unlocked using the mechanical
key when the alarm system is set, the alarm
may be triggered.
Changing engine switch modes
■
Release the brake pedal and press the
engine switch in step
The engine does not start and modes will be
changed each time the switch is pressed.
(P.149)
is shown on the
3
above.
If the battery is discharged
The following procedures may be
used to start the engine or opening
the doors, trunk or glove box if the
battery is discharged.
You can also call your Lexus dealer
or a qualified repair shop.
Locking and unlocking the doors
and opening the trunk
Use the mechanical key (P.94) in
order to perform the following opera-
tions:
Locking and unlocking the doors
■
P.330
Opening the trunk
■
1
Slide the rear passengers' seat
belts towards the outside.
If the seat belt is secured using the rear
seat belt holder, remove it. (P.27)
2
Insert your fingers at the positions
marked
and pull towards you to
A