170
4-3. Operating the lights and wipers
Lowering the windshield wipers to the
■
retracted position
With the windshield wipers placed on the
windshield, turn the engine switch to ON
and then move the wiper lever to an operat-
ing position. When the wiper switch is
turned off, the windshield wipers will stop at
the retracted position. Even if the wipers
deviate while the engine switch is off, the
wipers will return to the normal position.
NOTICE
When lifting the windshield wipers
■
●
Do not lift the windshield wipers when
they are in the retracted position
below the hood. Otherwise, they may
contact the hood, possibly resulting in
damage to a windshield wiper and/or
the hood.
●
Do not lift a windshield wiper by the
wiper blade. Otherwise, the wiper
blade may be deformed.
Do not operate the wiper lever when
●
the windshield wipers are lifted. Oth-
erwise, the windshield wipers may
contact the hood, possibly resulting in
damage to the windshield wipers
and/or hood.
Make sure that the wiper arms do not
●
overlap each other when returning
them. Failure to do so may cause dam-
age to the windshield wipers.