WARNING
If the vehicle cannot be driven in a sta-
●
ble manner, such as when the vehicle
has been in an accident or is malfunc-
tioning
When the vehicle is driven in a sporty
●
manner or off-road
When the tires are not properly
●
inflated
When the tires are very worn
●
When tires of a size other than speci-
●
fied are installed
When tire chains are installed
●
When a compact spare tire or an
●
emergency tire puncture repair kit is
used
If equipment (snow plow, etc.) that
●
may obstruct the radar sensor or front
camera is temporarily installed to the
vehicle
Changing settings of the pre-
collision system
Enabling/disabling the pre-colli-
■
sion system
The pre-collision system can be
enabled/disabled on
the multi-information display.
The system is automatically enabled each
time the engine switch is turned to ON.
If the system is disabled, the PCS warn-
ing light will turn on and a message will
be displayed on the multi-information
display.
4-5. Using the driving support systems
■
The pre-collision warning timing can
be changed on
multi-information display.
The operation timing setting is retained
when the engine switch is turned off.
(P.79) of
1
The warning will begin to operate earlier
than with the default timing.
2
This is the default setting.
3
The warning will begin to operate later
than with the default timing.
■
The pre-collision system is enabled and the
Changing the pre-collision warn-
ing timing
(P.79) of the
Far
Middle
Near
Operational conditions
181
4