Table of Contents
Advertisement
366
8-1. Specifications
Tire related term
Section width
Sidewall
Sidewall separation
Snow tire
Test rim
Tread
Tread rib
Tread separation
Treadwear indica-
tors (TWI)
Wheel-holding fix-
ture
*
: Table 1 Occupant loading and distribution for vehicle normal load for various desig-
nated seating capacities
Designated seating capacity,
Number of occupants
2 through 4
5 through 10
11 through 15
16 through 20
The linear distance between the exteriors of the sidewalls of an
inflated tire, excluding elevations due to labeling, decoration, or pro-
tective bands
That portion of a tire between the tread and bead
The parting of the rubber compound from the cord material in the
sidewall
A tire that attains a traction index equal to or greater than 110, com-
pared to the ASTM E-1136 Standard Reference Test Tire, when
using the snow traction test as described in ASTM F-1805-00, Stan-
dard Test Method for Single Wheel Driving Traction in a Straight
Line on Snow-and Ice-Covered Surfaces, and which is marked with
an Alpine Symbol (
The rim on which a tire is fitted for testing, and may be any rim listed
as appropriate for use with that tire
That portion of a tire that comes into contact with the road
A tread section running circumferentially around a tire
Pulling away of the tread from the tire carcass
The projections within the principal grooves designed to give a visual
indication of the degrees of wear of the tread
The fixture used to hold the wheel and tire assembly securely during
testing
Vehicle normal load, Num-
ber of occupants
Meaning
) on at least one sidewall
Occupant distribution in a
normally loaded vehicle
2
3
2 in front, 1 in second seat
2 in front, 1 in second seat, 1 in
5
third seat, 1 in fourth seat
2 in front, 2 in second seat, 2
7
in third seat, 1 in fourth seat
2 in front
Advertisement
Table of Contents
