Table of Contents
Advertisement
Installation
Remote Room: Installing the Keypads
1. Place the keypad mounting bracket over the junction box, with the mounting lips facing out.
2. Attach the keypad mounting bracket to the junction box with the four screws as shown below.
3. If the mounting bracket does not fit easily, loosen the screws and move the mounting bracket left and right to center it on the junction
box, then retighten the screws.
4. If necessary, work the loose cables back into the wall cavity.
5. Insert the top of the keypad onto the mounting bracket first, in the direction of the arrow (1), until it clicks.
6. Then push the bottom of the keypad onto the bracket in the direction of arrow (2).
45
Advertisement
Table of Contents
