Programming - Sony NHS-3020 Installation Manual

Table of Contents

Advertisement

Programming

Sony New Home Entertainment Solutions are designed for minimum on-site programming by the installer. However, for
greater system flexibility, you will need to perform some basic programming. Depending on the configuration of your system,
there can be four programming steps, as follows:
If your system has the following...
Set Top Box
Yes
Yes
No
16
Front Projector instead of
TV in main theater
No
Yes
No
...then you must perform the following steps.
1. Program the CAV-M1000ES for the cable, satellite or other set-top box
remote codes.
Step 1: Skip this step.
Step 2: Skip this step.
Step 3: Skip this step.
Step 4: Program the CAV-M1000ES for the cable, satellite or other set-top
box remote codes. See "PROGRAMMING STEP 4" on Page 23.
OPTIONAL: Program the CAV-M1000ES and RM-TP100 for
Auxiliary Input source equipment remote codes (if any are
connected). See "PROGRAMMING STEP 4" on Page 23.
Step 1: Download applications and files from the Internet. See
"PROGRAMMING STEP 1" on Page 17.
Step 2: Write a new Setup file to the CAV-M1000ES multi-room
distribution unit. See "PROGRAMMING STEP 2" on Page 19.
Step 3: Write a new Graphic User Interface (GUI) file to the
RM-TP100 RF remote control. See "PROGRAMMING STEP 3"
on Page 20.
Step 4: Program the CAV-M1000ES for the cable, satellite or other set-top
box remote codes. See "PROGRAMMING STEP 4" on Page 23.
OPTIONAL: Program the CAV-M1000ES and RM-TP100 for
Auxiliary Input source equipment remote codes (if any are
connected). See "PROGRAMMING STEP 4" on Page 23.
Step 1: Download applications and files from the Internet. See
"PROGRAMMING STEP 1" on Page 17.
Step 2: Write a new Setup file to the CAV-M1000ES multi-room
distribution unit. See "PROGRAMMING STEP 2" on Page 19.
Step 3: Write a new Graphic User Interface (GUI) file to the
RM-TP100 RF remote control. See "PROGRAMMING STEP 3"
on Page 20
Step 4: OPTIONAL: Program the CAV-M1000ES and RM-TP100 for
Auxiliary Input source equipment remote codes (if any are
connected). See "PROGRAMMING STEP 4" on Page 23.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nhs-2020Nhs-1020

Table of Contents