Table of Contents
Advertisement
AUX 1 INPUTS
ALL
ROOMS
VIDEO AUDIO L AUDIO R
VIDEO
Composite
Video Out
Auxillary A/V Component
NHS-3020/2020 AUX Connection Example
NHS-3020 and NHS-2020 Auxiliary Input Panel connections.
AUX INPUTS
ALL
ROOMS
VIDEO AUDIO L AUDIO R
VIDEO
Composite
Video Out
Auxillary A/V Component
NHS-1020 AUX Connection Example
NHS-1020 Auxiliary Input Panel connections.
NHS-3020/2020/1020
AUX Panel
External Wiring
Preparing the System Rack for Installation
1. Stage the System Rack close to the wall opening, on a stable platform off the floor.
2. Remove shipping lock-down fasteners located on back of rack shelves.
3. Unwind the service loop of back panel cables and connect them to the System Rack back panel.
4. Position the plywood box you've constructed in the soffit or wall cavity where the System Rack will be installed.
(See the "Planning" section of this manual for details on the plywood box.)
System Rack: Main Room Speakers
1.. Strip 1/2 inch of insulation off all main room speaker wires. Be careful not to cut conductor strands.
2.. Neatly twist the conductor strands so that they won't fray.
3. To help ensure proper sound, connect speaker wires observing consistent polarity. For every speaker, connect THE SAME
insulator color to the Red (+) terminal and the opposite insulator color to the Black (-) terminal.
4. Connect the Left, Right, Center, Left Surround, Right Surround, Left Surround Rear and Right Surround Rear speaker wires
to the "Speakers Main" output terminals on the back panel.
Installation
IR OUT
REMOTE
ROOMS
AUX 1
AUX 2
Left
Right
Line Out
Analog Audio
Auxillary A/V Component
IR OUT
AUX
Left
Right
Line Out
Analog Audio
ver: 03/23/06
by: Bill Sgambati
SONY CS&A
AUX 2 INPUTS
VIDEO AUDIO L AUDIO R
Digital COAX
Pr
Digital
Red
VIDEO
Left
Right
COAX
Component Video Output
Composite
Line Out
Audio
Video Out
Analog Audio
Out
MAIN
ROOM
Y
Pb
Green
Blue
33
Advertisement
Table of Contents
