Clean The Gun Daily - Graco Pro Xp 60 AA WB Instructions - Parts Manual

Clean the the Gun Gun Daily Daily
Clean Clean the Gun Daily
1. Turn OFF (O) the ES On-Off switch.
2. Discharge the system voltage. See
Discharge and Grounding Procedure, page
3. Follow the Pressure Relief Procedure, page
4. Remove the air cap/tip guard and spray tip.
5. Flush the gun, see
6. Follow the Pressure Relief Procedure, page
3A2497H
Fluid Voltage
Flushing, page 31.
7. Clean the outside of the gun with a non-flammable
solvent, as defined under
Use a soft cloth. Point the gun down to prevent
solvent from entering the gun passages. Do not
immerse the gun.
29.
28.
28.
8. Clean the air cap/tip guard and spray tip with a
soft brush and non-flammable solvent.
Maintenance
Flushing, page 31.
33