Repair
ES On
On - - - Off
Off Valve
Valve Repair
ES
ES
On
Off
Valve
1. Follow the steps in
Prepare the Gun for Service, page
2. Loosen the captive screw (26p). Remove the
valve (26) from the handle.
3. Lubricate the o-rings (26b* and 26g*) with
non-silicone grease, Part No. 111265. Do not
over-lubricate.
Note
Do not over-lubricate parts. Excessive
lubricant on the o-rings can be pushed
into the gun air passage and blemish the
finish on the workpiece.
Figure 40 ES On-Off Valve
52
Repair
Repair
44.
4. Clean and inspect parts for damage. Replace
if necessary.
Note
The protrusion on the retainer plate (26f)
must point upward.
5. Reinstall the valve. Torque the screw (26p) to
15-25 in-lb (1.7-2.8 N•m).
3A2497H