Clear Error Data - Omron V600-CA8A-V Series Operation Manual

Reading Error Information (ERR)

4-6-3 Clear Error Data

1, 2, 3...
3. When the INC Key is pressed, the number of error occurrences for the first
error code 10 is displayed. The maximum number of occurrences that can
be counted for each error code is 999.
4. While the error code is being displayed, use the horizontal cursor keys to
display the error messages. When a horizontal cursor key is pressed again,
the error code display is restored.
5. Press the INC Key to read the error occurrence conditions sequentially.
Press the DEC Key to perform the reverse operation.
6. After displaying occurrence conditions for all errors, press the INC Key to
display the MCBF. MCBF is obtained by dividing the total number of host
commands by the total number of occurrences of communications errors
(see note below).
Note This includes all communications errors with the host computer, R/W
Head, DC, and other devices.
Error data is cleared from memory.
ERROR1 4
ERR
RESET
CLEAR L?
3
SET
1. When the ERR Key is pressed, the error menu is shown on the display.
2. Press the 3 Key.
3. When the SET Key is pressed, the error data is cleared, and address/data
display is restored.
Note To cancel the error data clear command, press the SET Key before
pressing the RESET Key.
(1)
(2)
a00d00
(3)
Section 4-6
59