Specifications - Omron V600-CA8A-V Series Operation Manual

V600-CAjA-Vj ID Controller
Side Panel
R/W Head Connector
Parallel Interface Connector

2-1-2 Specifications

Ratings
Parameter
Supply voltage
Permissible variation
range of supply voltage
Power consumption
Insulation resistance
Dielectric strength
Noise resistance
Vibration Mechanical 10 to 150 Hz with 0.3-mm double amplitude for 32 minutes in X, Y, and Z directions
resistance
Malfunction 10 to 150 Hz with 0.2-mm double amplitude for 32 minutes in X, Y, and Z directions
Shock resistance
Ambient operating
temperature
Ambient operating
humidity
Atmosphere
Storage temperature
Protection class
Protection rating
Approved standards
Weight
Altitude
Overvoltage category
Pollution degree
Up to two R/W Heads can be connected.
Used for communications with the PC. Use the connector provided as an acces-
sory with the Unit when making the connection. (Refer to page 69 for details on
interface connection.)
R/W Head connectors
100 to 240 VAC, 50/60 Hz
85 to 264 VAC
35 VA max.
50 MΩ min. at 500 VDC between power supply terminals and case; between input/output
terminals and case; between power supply terminals and input/output terminals
For all combinations given above: 1,500 VAC 50/60 Hz for 1 minute, leakage current: 10 mA
max.
1,500 Vp-p, pulse width: 100 ns to 1 µs, rise time: 1 ns
20G, three times in X, Y, and Z directions
–10°C to 55°C
35% to 85% (without condensation)
With no corrosive gases
–25°C to 65°C
Class I (with protective conductor terminal)
IEC60529: IP30 (built into panel)
IEC1010-1, EN61010-1, UL3101, CSA1010.1, FCC Part 15 Subpart B
960 g
2,000 m max.
II
2
HEAD 1 HEAD 2
Parallel Interface connector
Specifications
Section
PARALLEL I/0
2-1
7