4.20 EDITING MIX PARAMETERS
(config 7)
Configuration 7 offers separate mix levels for the Resonator, Delay, and
Reverb modules, along with master/direct mix levels.
Direct Signal Level
The display says:
This sets the level for the direct signal path. Use this and the Master
Effects level control to balance the levels of the straight and processed
signal paths.
Master Effects Level
The display says:
This sets the master volume for all the effects module outputs. Use this
and the Direct signal control to balance the levels of the straight and
processed signal paths.
Preamp Signal Level
The display says:
This mixes the preamp output signal into the master effects buss. Note
that this level is dependent on the Preamp Output level found in the
DIRECT LEVEL:
5 0
MASTER EFFECTS
LEVEL: 0 0
PREAMP LEVEL:
5 0
87