Interfacing With Mixer Stereo Effects Sends; Footswitch Hookup - Alesis GT Reference Manual

Interfacing with Mixer Stereo Effects Sends

Application Patching into a mixer's stereo effects sends for use as a
reverb or other processor while recording.
Hookup Patch the mixer's auxiliary bus (or effects bus) sends into the
right and left QuadraVerb GT inputs, and patch the QuadraVerb GT's
right and left outputs to the mixer's stereo returns or if not available,
two standard mixer channel inputs.

1.4 FOOTSWITCH HOOKUP

There are two footswitch jacks on the rear panel that accept standard,
normally open, momentary contact footswitches.
A footswitch plugged into the Bypass jack duplicates the BYPASS button
function. Press on the footswitch to toggle between bypass and active
modes. When bypassed, the LED in the middle of the BYPASS button
will be lit.
A footswitch plugged into the Advance jack increments (or decrements)
From mixer
sends
Left Right Left
Input Input Output
7
to mixer
returns
Right
Output