Editing Mix Parameters; Direct Signal Level; Master Effects Level; Preamp Signal - Alesis GT Reference Manual

4.17 EDITING MIX PARAMETERS

(config 4)
Configuration 4 offers separate mix levels for the EQ, Pitch, and Delay
modules, along with master/direct mix levels.

Direct Signal Level

The display says:
This sets the level for the direct signal path. Use this and the Master
Effects level control to balance the levels of the straight and processed
signal paths.

Master Effects Level

The display says:
This sets the master volume for all the effects module outputs. Use this
and the Direct signal control to balance the levels of the straight and
processed signal paths.

Preamp Signal

The display says:
This selects whether the preamp output will be routed through the EQ
before being sent to the Output Level Control.
DIRECT LEVEL:
5 0
MASTER EFFECTS
LEVEL: 0 0
PREAMP SIGNAL:
P RE-EQ
80