current program by pressing the STORE button twice. To use a preset as a
starting point for your own custom tone curve, simply edit its EQ and/or
resonator parameters until you have the sound you want (for more
about the specific parameters, see their explanations below). Then press
the STORE button twice. This will store the edited tone curve as part of
the program that you are currently working on. The next time you call
up that program, your edits will appear as the program's USER curve.
Configuration 5 has 6 tone curves. They are:
¥ #1 (3 Band EQ Mode)
¥ #2 (3 Band EQ Mode)
¥ #3 (3 Band EQ Mode)
¥ #4 (3 Band EQ Mode)
¥ #5 (3 Band EQ Mode)
¥ #6 (3 Band EQ Mode)
Low EQ Frequency
The display says:
This sets the frequency below which all signals will be boosted or cut by
the amplitude amount set on the next page.
Low EQ Amplitude
The display says:
This sets the amount of boost (positive numbers) or cut (negative
numbers) at the Low EQ Frequency set on the previous page.
LOW EQ FREQUENCY
2 00Hz
LOW EQ AMPLITUDE
+ 0 0.00dB
70