Chapter 6 Ð The Midi Button; Select Midi Mode - Alesis GT Reference Manual

CHAPTER 6 Ð THE MIDI BUTTON
This Chapter describes how to set up the QuadraVerb GT for MIDI
operation. The next Chapter covers how to modulate different
parameters via MIDI continuous controllers.
Please note that the MIDI button selects global settings that apply to all
programs. Only the MIDI modulation options are stored with each
program.
All operations begin by pressing the MIDI button. The LED in the middle
of the button will light. Use the PAGE buttons to select the following
pages, and the VALUE buttons to select the parameter value for each
page.

6.1 SELECT MIDI MODE

The display says:
There are two options.
¥ Omni In this mode, the QuadraVerb GT will respond to any data
coming in from any MIDI channel. If youÕre using the QuadraVerb
GT only with something like a MIDI Program Change Footswitch or
Continuous Controller pedal, this is a hassle-free setting. If there are
several devices connected to the MIDI line, you will need to assign
each one to its own channel number, described next.
¥ 01-16 This selects a MIDI channel from 1 to 16. The QuadraVerb GT
will respond only to information appearing on the selected channel.
Example: If you want to control two independent QuadraVerb GTÕs
from the same MIDI line, set each one to a different channel, such as
1 and 2, 5 and 10, 11 and 16, etc.
MIDI CHANNEL:
O MNI
97