Program Advance Footswitch Range; Chapter 7 Ð Midi Modulation (Name/Mod Button) - Alesis GT Reference Manual

QuadraVerb GTÕs internal battery goes dead, the unit gets abused and
needs to be repaired, etc.), you can reload your programs back into the
QuadraVerb GT and be right back in business with your own favorite
patches.
REMEMBER: The System Exclusive page must be set to ON for any of
this stuff to work at all.

6.7 PROGRAM ADVANCE FOOTSWITCH RANGE

The display says:
The advance footswitch jack on the rear panel lets you increment or
decrement through a range of programs (as set on this page) one
program at a time. Enter the range by alternating between the two
numbers with the PAGE buttons, and change the numbers with the
VALUE buttons.
If the first number is higher than the second one, each footswitch press
will decrement the program number by one. If the first number is lower
than the second one, each footswitch press will increment the program
number by one.
Examples: If the first number is set to 76 and the second to 70, then
pressing the footswitch will cycle through the programs in the following
order: 76, 75, 74, 73, 72, 71, 70, 76, 75, 74, 73, 72, 71, 70, 76, etc.
If the first number is set to 00 and the second to 10, then pressing the
footswitch will cycle through the programs in the following order: 00, 01,
02, 03, 04, 05, 06, 07, 08, 09, 10, 00, 01, 02, 03, 04, 05, etc.
CHAPTER 7 Ð MIDI MODULATION
(NAME/MOD BUTTON)
Now weÕre getting into the part for the hardcore MIDI fanatic; if youÕre
FOOTSWITCH RANGE
0 0 THROUGH 99
103