Low Mid Eq Bandwidth (5 Band Eq Mode Only); Low Mid Eq Amplitude (5 Band Eq Mode Only); Mid Eq Frequency - Alesis GT Reference Manual

All three midrange filters are parametric types. This parameter sets the
lower midrange frequency at which signals will be boosted or cut.

Low Mid EQ Bandwidth (5 Band EQ mode only)

The display says:
Bandwidth refers to the width (range of frequencies) of the band of
frequencies that will be affected by the EQÕs boost and cut values.
Example: A bandwidth of one octave boosts a wider range of frequencies
than a bandwidth of 0.2 octaves.

Low Mid EQ Amplitude (5 Band EQ mode only)

The display says:
This sets the amount of boost (positive numbers) or cut (negative
numbers) at the lower midrange frequency set on the Low Mid EQ
Frequency page.

Mid EQ Frequency

The display says:
All three midrange filters are parametric types. This parameter sets the
midrange frequency at which signals will be boosted or cut.
LO MID EQ WIDTH
1 .00 OCTAVES
LOW MID EQ AMP
+ 0 0.00dB
MID EQ FREQUENCY
2 000Hz
65