Resonator Decay (5 Resonator/3 Eq Mode Only); Resonator Amplitude (5 Resonator/3 Eq Mode Only); Editing 3-Band Eq (Config 5); Eq Preset - Alesis GT Reference Manual

Resonator Decay (5 Resonator/3 EQ mode only)

The display says:
This sets the decay time for each resonator. The higher the number, the
longer the decay.

Resonator Amplitude (5 Resonator/3 EQ mode only)

The display says:
This sets the volume level for each resonator. The higher the number,
the louder the output of the resonator. Please note that if all resonators
are assigned a value of 00, you will not hear any sound in this
configuration.

4.12 EDITING 3-BAND EQ (config 5)

EQ Preset

The display says:
This page allows you to access 6 preset tone curves, or to create your own
curve from scratch. The EQ parameters of the 6 preset curves have been
programmed to give you a variety of tones to choose from. To listen to
each tone curve, press the Up VALUE button which will scroll through
presets 1 through 6. If you find a preset you like, you can store it to the
RESONATOR 1 DCY:
9 0
RESONATOR 1 AMP:
9 9
EQ PRESET:
U SER
69