Preamp > 3 Band Eq > Reverb - Alesis GT Reference Manual

Multi Tap delay is also available in this mode along with the standard
mono, stereo, and ping-pong delays. Up to eight taps are available along
the delay line; each tap has variable delay time, panning, volume, and
feedback. For more details about multitap delays, see section 4.5.
Panning and Tremolo are available in this configuration, and are in
series with the EQ signal line. The Preamp Signal Pre/Post EQ switch
chooses whether the Preamp Output comes from before or after the EQ.
#5 Preamp > 3 Band EQ > Reverb
This is the recommended configuration when you want the best possible
reverb sound. By restricting the number of effects, the QuadraVerb GT
can devote its full computing power to creating awesome reverberation
effects. However, EQ is still available for additional tone shaping, as is a
simpler version of chorusing.
Configuration 5
INPUT
3 BAND
PREAMP
EQ
EQ
Output
24
Mono
Stereo
Reverb
Input
REVERB +
CHORUS
Preamp
Effects
Pre/Post EQ
Delay Output
Output
OUTPUT
Direct Output
Pre-Amp Signal