Graphic Frequencies And Levels - Alesis GT Reference Manual

program, your edits will appear as the program's USER curve.
Configuration 3 has 6 tone curves. They are:
¥ #1 (Graphic EQ Mode)
¥ #2 (Graphic EQ Mode)
¥ #3 (Graphic EQ Mode)
¥ #4 (Graphic EQ Mode)
¥ #5 (Graphic EQ Mode)
¥ #6 (Graphic EQ Mode)

Graphic Frequencies and Levels

The display says:
Configurations 3Õs EQ is an 11-band graphic equalizer. It only has one
page, but all frequencies and levels are accessed from it, and the display
shows a graph that indicates the approximate frequency response.
To program the graphic EQ:
¥ Use the PAGE buttons to select different bands, as shown in the
displayÔs lower left corner. The available bands are 16 Hz, 32 Hz, 62
Hz, 126 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, and 16 kHz.
¥ Use the VALUE buttons to select the desired amount of boost or cut.
The display will show a flashing dash that corresponds to the chosen
frequency band, which will move above or below the dotted
centerline to indicate a boosted or cut frequency band respectively.
GRAPHÉÉÉÉÉÉÉÉÉÉ
16Hz
62