Alesis GT Documentation Update

Quadraverb GT Reference Manual
Update and Correction Notice
Page 35 Section heading "Cabinet Simulator" should read:
Cabinet Simulator Global Control
Much of the sound of an electric guitar doesn't come just ftom the guiar amp or effects, but from the
sound of the speaker cabinet. The GT includes two very realistic Cabinet Simulators for simulating the
sound of speaker cabinets. In addition there's a convenient Global override function that allows you o: l)
Turn off the Cabinet Simulators globally without losing the individual program settings, if you're driving
Loltgl@glllp-an
ar4p;_or 2) Choose CabinetLSimulator I or2glohally for Spcialapplicr&lns--
where ttre individual settings are not appropriate. This saves you the hassle of reprogramming all your
parches. There are two Modes for the Cabinet Simulator:
Mode 1: PROGRAM. This Mode stores the Cabinet Simulator setting with each program. Use
PROGRAM for all basic individual program editing and for normal storage of Cabinet Simulators
settings in individual prognms.
Mode 2: GLOBAL. This Mode overrides the individual program Cabinet Simulator settings for use with
a guitar amp or special situations. There are 3 choices in GLOBAL Mode:
l. OIIF. Use this when you're using your GT with a guitar amplifier. You probably won't want
ttre effect of the Cabinet Simulaors combined with the sound of your guitar amp's speakers. This
conveniently turns off the Cabinet Simulators globally without losing the individual program's
settings.
2. CABINET 1. This allows you to override individual program Cabinet Simulator senings and
only use Cabinet l, without losing the individual program's settings.
3. CABINET 2. This allows you io overide individual program Cabinet Simulator senings and
only use Cabinet 2, without losing the individual program's settings.
To choose Mode 1 or 2, press Preamp until the display reads:
CAB SIMULATOR
PROGRAM
or
CAB SIMULATOR
GLOBAL
Scroll Value Up or Down to choose the Mode you want.
If you choose PROGRAM, Press PAGE Up and Scroll with the Value Buttons to choose these three
options: OtF; CABINET 1; CABINET 2.
If you choose GLOBAL, Press PAGE Up and Scroll with the Value Buttons to choose these three options:
OFF GLOBAL; CABINET I GLOBAL; CABINET 2 GLOBAL.
Cop!triSbt f992 Alsi, Cqpqlrti@ SFcific.lio SubFct to Gugc Wirhor Ndi€ Al98