Mitsubishi AJ65BT-64RD3 User Manual page 3

www.plcworld.cn
When using Mitsubishi equipment, thoroughly read this manual and the associated manuals introduced
in this manual. Also pay careful attention to safety and handle the module properly.
These precautions apply only to Mitsubishi equipment. Refer to the user's manual of the used CPU
module for a description of the PLC system safety precautions.
These SAFETY PRECAUTIONS
and "CAUTION".
DANGER
CAUTION
Depending on circumstances, procedures indicated by
results.
In any case, it is important to follow the directions for usage.
Store this manual in a safe place so that you can take it out and read it whenever necessary. Always
forward it to the end user.
[DESIGN PRECAUTIONS]
When there are communication errors with the data link, the data of the master module will be held.
Built an interlock circuit into the sequence program that will make sure the system operate safely by using
the communication status information.
Do not bunch the control wires or communication cables with the main circuit or power wires, or them close
to each other.
They should be installed 100 mm (3.9 in.) or more from each other.
Not doing so could
SAFETY PRECAUTIONS
(Read these precautions before using.)
classify the safety precautions into two categories: "DANGER"
Procedures which may lead to a dangerous condition and cause death or
serious injury if not carried out properly.
Procedures which may lead to a dangerous condition and cause superficial
to medium injury, or physical damage only, if not carried out properly.
result in noise that would cause malfunction.
CAUTION may also be linked to serious
DANGER
CAUTION