Mitsubishi AJ65BT-64RD3 User Manual page 71

www.plcworld.cn
Before using this product, please read this manual and the relevant manuals introduced in this manual
carefully and pay full attention to safety to handle the product correctly.
The precautions given in this manual are concerned with this product. Refer to the user's manual of the
CPU module to use for a description of the PLC system safety precautions.
In this manual, the safety precautions are ranked as "DANGER" and "CAUTION".
!
!
Note that the
Always follow the precautions of both levels because they are important to personal safety.
Please save this manual to make it accessible when required and always forward it to the end user.
[Design Precautions]
When there are communication problems with the data link, the data for the master module will
be held.
Configure an interlocking circuit in a sequence program so that the safety of the overall system
is always maintained.
Do not bunch the control wires or communication cables with the main circuit or power wires, or
install them close to each other.
They should be installed 100mm (3.9inch) or more from each other.
Not doing so could result in noise that would cause erroneous operation.
SAFETY PRECAUTIONS
(Always read these precautions before using this equipment.)
Indicates that incorrect handling may cause hazardous conditions,
DANGER
resulting in death or severe injury.
Indicates that incorrect handling may cause hazardous conditions,
CAUTION
resulting in medium or slight personal injury or physical damage.
CAUTION level may lead to a serious consequence according to the circumstances.
!
DANGER
!
CAUTION
!
A - 1