Mitsubishi AJ65BT-64RD3 User Manual page 56

www.plcworld.cn
5. PROGRAMMING
Conversion enable/disable designation
CH. 1 conversion enable
CH. 2 conversion enable
C H . 2• Ï Š · ‹ – ‰ Â
Detected temperature value read
Handling at error occurrence
Error reset
5-13
MELSEC-A
Turns ON CH. 1 conversion
enable flag (RY00).
Turns ON CH. 2 conversion
enable flag (RY01).
Reads CH. 1 detected
temperature value (16 bits)
(RWr0).
Reads CH. 1 detected
temperature value (32 bits)
(RWr4, RWr5).
Reads CH. 2 detected
temperature value (16 bits)
(RWr1).
Reads CH. 2 detected
temperature value (32 bits)
(RWr6, RWr7).
Turns ON Y91 when E PROM
2
is faulty.
Turns ON Y92 when CH. 1
wire breakage is detected.
Turns ON Y93 when CH. 2
wire breakage is detected.
Turns ON error reset
request flag (RY7A).
Turns OFF error reset
request flag (RY7A).