Mitsubishi FX2N-10PG Installation Manual

This manual contains text, diagrams and explanations which will guide the reader in the correct
installation, safe use and operation of the FX
and understood before attempting to install or use the unit. Further information can be found in the
manuals listed under further information.
Specifications are subject to change without notice
Guidelines for the Safety of the User and Protection of FX
PULSE GENERATOR BLOCK
This manual has been written to be used by trained and competent personnel. The definition of such a
person or persons is as follows:
a) Any engineer using the product associated with this manual, should be of a competent nature, trained and
qualified to the local and national standards. These engineers should be fully aware of all aspects of safety with
regards to automated equipment.
b) Any commissioning or service engineer must be of a competent nature, trained and qualified to the local and
national standards.
c) All operators of the completed equipment should be trained to use that product in a safe and coordinated
manner in compliance to established safety practices.
Note: The term 'completed equipment' refers to a third party constructed device which contains or uses
the product associated with this manual.
Note's on the Symbols Used in this Manual
At various times through out this manual certain symbols will be used to highlight points of information
which are intended to ensure the users personal safety and protect the integrity of equipment.
1) Indicates that the identified danger WILL cause physical and property damage.
2) Indicates that the identified danger could POSSIBLY cause physical and property damage.
•Under no circumstances will Mitsubishi Electric be liable responsible for any consequential dam-
age that may arise as a result of the installation or use of this equipment.
• All examples and diagrams shown in this manual are intended only as an aid to understanding the
text, not to guarantee operation. Mitsubishi Electric will accept no responsibility for actual use of the
product based on these illustrative examples.
• Owing to the very great variety in possible application of this equipment, you must satisfy yourself as
to its suitability for your specific application.
Further Information Manual Lists
Manual name
FX -10PG
2N
USER'S MANUAL
FX
2N
HARDWARE MANUAL
FX Series
3U
User's Manual
- Hardware Edition
FX
2NC
HARDWARE MANUAL
FX Series
3UC
User's Manual
- Hardware Edition
FX SERIES
PROGRAMMING
MANUAL ΙΙ
FX /FX /FX /
3S 3G 3GC
FX /FX Series
3U 3UC
Programming Manual
- Basic & Applied
Instruction Edition
FX
2N
Manual No.
Describes specifications, wiring, installation, handling,
JY992D93401
etc. of FX
Describes contents related to hardware of FX
JY992D66301
PLC such as specifications, wiring and installation.
Describes the specification, wiring and installation of
JY997D16501
FX
Describes contents related to hardware of FX
JY992D76401
PLC such as specifications, wiring and installation.
Describes the specification, wiring and installation of
JY997D28701
FX
Describes instructions of FX
JY992D88101
PLC
This manual explains the installations of FX
JY997D16601
FX
-10PG PULSE GENERATOR BLOCK
2N
INSTALLATION MANUAL
JY992D91901E
-10PG PULSE GENERATOR BLOCK and should be read
-10PG.
2N
series PLC.
3U
series PLC.
3UC
/FX /FX series PLC.
3GC 3U 3UC
-10PG
2N
Description
/FX /FX /FX
1S 1N 2N
series
2N
series
2NC
series
2NC
/FX /
3S 3G