Mitsubishi AJ65BT-64RD3 User Manual page 118

www.plcworld.cn
5 PROGRAMMING
Checking of AJ65SBT-64AD status
Initial settings
Changing of initial settings
Initial setting change
Processing at initial settings
Read of digital values
(2) Program example
* The program enclosed by the dotted line is necessary only when the initial settings
are changed.
5 - 9
MELSEC-A
Reads data link status
AJ65SBT-64AD
data link normal
AJ65SBT-64AD
data link abnormal
A/D conversion enable/prohibit
specification(RWw0)
Input range setting(RWw1)
Moving average processing
count setting(RWw2)
CH.1 moving average processing
specifying flag(RY00)
CH.2 moving average processing
specifying flag(RY01)
Turns on initial data processing
completion flag(RY18)
Turns on initial data setting
request flag(RY19)
A/D conversion enable/prohibit
specification(RWw0)
Input range setting(RWw1)
Moving average processing
count setting(RWw2)
CH.1 moving average processing
specifying flag(RY00)
CH.2 moving average processing
specifying flag(RY01)
Turns on initial data setting
request flag(RY19)
Turns off initial data processing
completion flag(RY18)
Turns off initial data setting
request flag(RY19)
Reads CH.1 digital output value
(RWr0)
Reads CH.2 digital output value
(RWr1)