Mitsubishi AJ65BT-64RD3 User Manual page 116

www.plcworld.cn
5 PROGRAMMING
*1 When making remote device station initialization procedure registration to multiple
stations, correct the program within the dotted line 1) as shown below.
RX(m+1)B and RX(n+1)B are remote READY.
RX(m+1)8 and RX(n+1)8 are initial data processing request flags.
The device numbers change depending on the station number. Insert the remote
READY and initial data processing request flags for all the stations, to which the
remote device station initialization procedure registration has been made, into the
program.
SB5F
RX(m+1)B RX(n+1)B
RX(m+1)8
RX(n+1)8
*2 The program enclosed by the dotted line 2) is necessary only when the initial
settings are changed.
5 - 7
MELSEC-A