Mitsubishi AJ65BT-64RD3 User Manual page 11

www.plcworld.cn
About Generic Terms and Abbreviations
Unless otherwise specified, this manual uses the following generic terms and abbreviations to
explain the AJ65BT-64RD3/AJ65BT-64RD4 platinum temperature-measuring resistor Pt100
temperature input module.
Generic Term/
Abbreviation
GX Developer
ACPU
QnACPU
QCPU (A mode)
QCPU (Q mode)
Master station
Local station
Remote I/O station
Remote device station
Remote station
Intelligent device station
Master module
SB
SW
RX
RY
RWw
RWr
Generic product name for product model names SWnD5C-GPPW, SWnD5C-GPPW-A, SWnD5C-GPPW-V
and SWnD5C-GPPW-VA. n in the model name indicates 4 or more.
Generic term for A0J2CPU, A0J2HCPU, A1CPU, A2CPU, A2CPU-S1, A3CPU, A1SCPU, A1SCPUC24-R2,
A1SHCPU, A1SJCPU, A1SJCPU-S3, A1SJHCPU, A1NCPU, A2NCPU, A2NCPU-S1, A3NCPU, A3MCPU,
A3HCPU, A2SCPU, A2SHCPU, A2ACPU, A2ACPU-S1, A3ACPU, A2UCPU, A2UCPU-S1, A2USCPU,
A2USCPU-S1, A2USHCPU-S1, A3UCPU and A4UCPU.
Generic term for Q2ACPU, Q2ACPU-S1, Q2ASCPU, Q2ASCPU-S1, Q2ASHCPU, Q2ASHCPU-S1, Q3ACPU,
Q4APU and Q4ARCPU.
Generic term for Q02CPU-A, Q02HCPU-A and Q06HCPU-A.
Generic term for Q02CPU, Q02HCPU, Q06HCPU, Q12HCPU and Q25HCPU.
Station that controls a data link system.
One station is required for one system.
Station that has a PLC CPU and can communicate with the master station and other local stations.
Station that handles only bit unit information. (Input/output from/to external device)
(AJ65BTB1-16D, AJ65SBTB1-16D, etc.)
Station that handles bit unit information and word unit information. (Input/output from/to external device, analog
data conversion)
Generic term for remote I/O station and remote device station. Controlled by the master station.
Station that can perform transient transmission, e.g. AJ65BT-R2. (Local station included)
Generic term for QJ61BT11, QJ61BT11N, AJ61BT11 A1SJ61BT11, AJ61QBT11 and A1SJ61QBT11 used as
the master station.
Link special relay (for CC-Link)
Bit unit information that indicates the module operation status or data link status of the master station/local
station. Represented as SB for convenience.
Link special register (for CC-Link)
16-bit unit information that indicates the module operation status or data link status of the master station/local
station. Represented as SW for convenience.
Remote input (for CC-Link)
Information input from a remote station to the master station in bit unit. Represented as RX for convenience.
Remote output (for CC-Link)
Information output from the master station to a remote station in bit unit. Represented as RY for convenience.
Remote register (write area for CC-Link)
Information output from the master station to a remote device station in 16-bit unit. Represented as RWw for
convenience.
Remote register (read area for CC-Link)
Information input from a remote device station to the master station in 16-bit unit. Represented as RWr for
convenience.
Description