Mitsubishi AJ65BT-64RD3 User Manual page 51

www.plcworld.cn
5. PROGRAMMING
*1: Correct the program within dotted frame 1) as shown below when remote device station
initialization procedure registration is executed for multiple modules.
RX(m+1)9 and RX(n+1)9 are initial data setting completion flags. The device numbers change
depending on the station number.
Insert the initial data setting completion flags of all stations where remote device station
initialization procedure registration has been set.
RX(m+7)9
RX(n+7)9
RX(m+7)8
RX(n+7)8
*2: The program within dotted frame 2) is necessary only when the initial setting is changed.
5-8
MELSEC-A