Mitsubishi AJ65BT-64RD3 User Manual page 124

www.plcworld.cn
5 PROGRAMMING
Changing of initial settings
Initial setting change
Processing at initial settings
Read of digital values
Processing at error occurrence
Write of remote output signals
Error reset
* The program enclosed by the dotted line is necessary only when the initial settings
are changed.
5 - 15
MELSEC-A
CH.1 moving average
processing specifying flag
(RY00)
CH.2 moving average
processing specifying flag
(RY01)
Turns on initial data
processing completion flag
(RY18)
Turns on initial data setting
request flag(RY19)
A/D conversion enable/
prohibit specification
(RWw0)
Input range setting(RWw1)
Moving average processing
count setting(RWw2)
Writes to master station
CH.1 moving average
processing specifying flag
(RY00)
CH.2 moving average
processing specifying flag
(RY01)
Turns on initial data setting
request flag(RY19)
Turns off initial data
processing completion flag
(RY18)
Turns off initial data setting
request flag(RY19)
Reads CH.1 digital output
value(RWr0)
Reads CH.2 digital output
value(RWr1)
Turns on Y91 at CH.1 range
error occurrence
Turns on Y92 at CH.2 range
error occurrence
Turns on Y93 at CH.3 range
error occurrence
Turns on Y94 at CH.4 range
error occurrence
Turns on Y95 at E PROM
2
write error occurrence
Turns on error reset request
flag(RY1A)
Turns off error reset request
flag(RY1A)
Y400 to Y41F are written
into RY00 to RYIF