Bank 3; Bank 4; Bank 5 - Roland Kiwitechnics KIWI-SJX Manual

BANK 3

Edit Letter "/" (JX-10)

BANK 4

Edit Letter "\" (JX-10)

BANK 5

Edit Letter "<" (JX-10)
www.kiwitechnics.com
This button will select Bank 3 Patches
under normal play mode. The Patch will
immediately load. Each Bank # has 8
Patches which are selected using the
Patch Number Pad buttons
When writing a Patch these buttons will
select the Bank that the Patch will be
stored under. The Patch is not written to
memory until the Patch Number Pad
Button ENTER is pressed. This allows a
Patch to be written (or moved) to any
position in memory.
This button will select Bank 4 Patches
under normal play mode. The Patch will
immediately load. Each Bank # has 8
Patches which are selected using the
Patch Number Pad buttons
When writing a Patch these buttons will
select the Bank that the Patch will be
stored under. The Patch is not written to
memory until the Patch Number Pad
Button ENTER is pressed. This allows a
Patch to be written (or moved) to any
position in memory.
This button will select Bank 5 Patches
under normal play mode. The Patch will
immediately load. Each Bank # has 8
Patches which are selected using the
Patch Number Pad buttons
When writing a Patch these buttons will
select the Bank that the Patch will be
stored under. The Patch is not written to
memory until the Patch Number Pad
Button ENTER is pressed. This allows a
Patch to be written (or moved) to any
position in memory.
When the Kiwi-SJX is in Tone Edit
Mode This buttons will select the
current Tone Bank 3 for Loading or
Saving.
In the JX-10 version during Seq
Editing this button will allow overdubs
on an existing sequence. This is
explained in more detail in the
Sequencer description
In the JX-10 only during Name Editing
this button will select the "/" (Forward
Slash) character.
When the Kiwi-SJX is in Tone Edit
Mode This buttons will select the
current Tone Bank 4 for Loading or
Saving.
In the JX-10 version during Seq
Editing this button will step the current
sequence edit position towards the
first step if possible. This is explained
in more detail in the Sequencer
description
In the JX-10 only during Name Editing
this button will select the "\" (Back
Slash) character.
When the Kiwi-SJX is in Tone Edit
Mode This buttons will select the
current Tone Bank 5 for Loading or
Saving.
In the JX-10 version during Seq
Editing this button will step the current
sequence edit position towards the
last step if possible. This is explained
in more detail in the Sequencer
description
In the JX-10 only during Name Editing
this button will select the "<" (Left
Bracket) character.
JX-SJX Upgrade User Manual v100
18