Roland Kiwitechnics KIWI-SJX Manual page 72

Table 1.0 Command ID
www.kiwitechnics.com
Data Byte
$1a (26)=Patch Clock TempoHi
$1b (27)=Patch Clock TempoLo
$1c (28)=ArpClockDivide
$1d (29)=SeqClockDivide
$1e (30)=Load Sequence
$1f (31)=Patch Bend Range
$20 (32)=Not Used
$21-$34 (33-52) = Lower Tone Name
Data Type Data Details
Byte details
7 ------- 0
0000xxxx If this is nonzero it will replace the internal Clock
speed with this temporary value. If this value is zero
the internal clock will remain unchanged.
0 or 1-255 = Internal or 5-300 BPM
This byte is sent as two nibbles which are combined to
make single 8 bit command.
0000xxxx + 0000yyyy = xxxxyyyy
0000yyyy
0000xxxx xxxx= 0000-Half Note (48 Clocks/Step)
0001-Quarter note (24 Clocks/Step)
0010-8th note (12 Clocks/Step)
0011-8th note, half swing (14,10 Clocks/Step)
0100-8th note, full swing (16,8 Clocks/Step)
0101-8th note triplets (8 Clocks/Step)
0110-16th note (6 Clocks/Step)
0111-16th note, half swing (7,5 Clocks/Step)
1000-16th note, full swing (8,4 Clocks/Step)
1001-16th note triplets (4 Clocks/Step)
1010-32nd note (3 Clocks/Step)
1011-32nd note triplets (2 Clocks/Step)
1100-64th note triplets (1 Clocks/Step)
0000xxxx xxxx= 0000-Half Note (48 Clocks/Step)
0001-Quarter note (24 Clocks/Step)
0010-8th note (12 Clocks/Step)
0011-8th note, half swing (14,10 Clocks/Step)
0100-8th note, full swing (16,8 Clocks/Step)
0101-8th note triplets (8 Clocks/Step)
0110-16th note (6 Clocks/Step)
0111-16th note, half swing (7,5 Clocks/Step)
1000-16th note, full swing (8,4 Clocks/Step)
1001-16th note triplets (4 Clocks/Step)
1010-32nd note (3 Clocks/Step)
1011-32nd note triplets (2 Clocks/Step)
1100-64th note triplets (1 Clocks/Step)
0000xxxx Seq number to load (1-8) - 0 is do not load Seq
000000xx xx = 00 - 2 Semitones
01 - 5 Semitones
10 - 7 Semitones
11 - 12 Semitones
00000000
Ascii Bytes 20 bytes Tone Name
JX-10/MKS-70 Upgrade User Manual v100
72