Roland Kiwitechnics KIWI-SJX Manual page 87

Table 1.0 Command ID
$1f (31) Transmit or Receive Patch
Dump
2 bytes Bank/Patch + 269 data
bytes
WARNING! This command will overwrite
the current sounding Patch with
the Patch selected
$20 (32) Request Edit Buffer Patch
Parameter
Param Number
$21 (33) Transmit / Receive Edit
Buffer Patch Parameter
Param # + 2 data bytes
www.kiwitechnics.com
Data Byte
Bank Number
Patch Number
$00 (0) - Patch Parameter Number
(Hi)
Data format the same as $08
Parameter Number is Data Posn
$01 (1) - Parameter Number (Lo)
$00 (0) - Patch Parameter Number
(Hi)
Data format the same as $08
Parameter Number is Data Posn
$01 (1) - Parameter Number (Lo)
$02 (2) - Parameter Value (Hi)
$03 (3) - Parameter Value (Lo)
Data Type Data Details
Byte details
7 ------- 0
000000xx xx = 0 for Patch 1-128
1 for Patch 129-256
2 for Patch 257-384
3 for Patch 385-512
0xxxxxxx X = 0-127 for Patch 1-128 within Bank
269 bytes in the same format as the $1d Patch Edit dump
000000xx x = Data Offset 0-271 ($0-$10f)
Use Data Position for Parameter Number
KiwiSJX transmits a $21 (33) command
0yyyyyyy Hi & Lo are combined to make single 9 bit command.
000000xx + 0yyyyyyy = 0000000x xyyyyyyy
000000xx x = Data Offset 0-271 ($0-$10f)
Use Data Position for Parameter Number
0yyyyyyy Hi & Lo are combined to make single 9 bit command.
000000xx + 0yyyyyyy = 0000000x xyyyyyyy
000xxxxx
0yyyyyyy Hi & Lo are combined to make single 12 bit command.
000xxxxx + 0yyyyyyy = 0000xxxx xyyyyyyy
JX-10/MKS-70 Upgrade User Manual v100
87