Parker PDHX-E Series User Manual page 31

Signal Type E
RS232 data signals.
Signal Type F
RP240 RS232 data signals.
Signal Type G
RP240 +5V DC supply (150mA max).
Signal Type I
Signal ground.
Signal Type J
RS485 data signals.
Address Switch
The address of the drive is set using an internally mounted bit switch. The switch may be
accessed via the ventilation slots on the top of the drive - see Figure 3-8. Address selection
is described in Communicating With The Positioner .
RAM WE
ADDRESS 1
ON
Figure 3-8. Connector and Switch Positions
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com