Parker PDHX-E Series User Manual page 91

Step 3
You will not execute any commands until you use the # command. Type the following:
The response will be:
*SEQUENCE 001 COMMAND A10
Step 4
To execute more than one command at a time, follow the # sign with the number of
commands you want executed.
Command
#3
To complete the sequence, use the # sign until all the commands are completed. To exit
Single-Step mode, type:
XST0
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Command
#
Description
Executes 3 commands, then pauses sequence execution
Description
Executes one command