Console Access; Router Default Settings; Reset Your Router To Factory Defaults - TRENDnet TWG-431BR User Manual

TRENDnet User's Guide

Console access

Using the includes RS-232 to RJ-45 console cable, you can access the router console
command line interface management through the console port for debugging and
troubleshooting if necessary.
You can access the command line interface management of router using the terminal
emulation program settings below.
Baud Rate (bps)
Data Bits
Parity Bits
Stop Bits
Hardware Flow Control

Router Default Settings

Administrator User Name
Administrator Password
Router IP Address
Router Subnet Mask
DHCP Server IP Range
Default WAN Mode
© Copyright 2019 TRENDnet. All Rights Reserved.
57600
8
None
1
Off
admin
admin
192.168.10.1
255.255.255.0
192.168.10.101-192.168.199
4 WAN (Ports 2-5) / 1 LAN (Port 1)

Reset your router to factory defaults

Maintenance > Profile Setting
You may want to reset your router to factory defaults if you are encountering difficulties
with your router and have attempted all other troubleshooting.
There are two methods that can be used to reset your router to factory defaults.
• Reset Button – Located on the rear panel of your router, see
Features". Use this method if you are encountering difficulties with accessing
your router management page.
OR
• Router Management Page
1. Log into your router management page (see
on page 7).
2. Click on Maintenance, then click on Profile Setting.
3. Next to Reset to Factory Default, click Default. When prompted to confirm this action,
click OK.
4. Wait for the router to settings to factory default.
TWG-431BR
"Product Hardware
"Access your router management page"
71