TRENDnet TWG-431BR User Manual page 61

TRENDnet User's Guide
6. For the Local ID Type, select IP Address.
7. In the Local Subnets field, enter the local LAN IP subnet. (e.g. 192.168.10.0/24).
You can add additional local subnets if needed. (e.g. 192.168.10.0/24,192.168.20.0/24)
8. For the Remote ID Type, select IP Address.
9. In the Remote Subnets field, enter the remote LAN IP subnet. (e.g. 192.168.100.0/24)
You can add additional local subnets if needed. (e.g.
192.168.100.0/24,192.168.120.0/24)
10. In the Remote Host field, enter the remote WAN1 IP. (e.g. 10.10.10.20) This can also
be a domain name (ex: dynamic DNS host name)
11. Enter the Pre-Shared Key (PSK) for the IPsec VPN tunnel. (e.g. 1234567890)
© Copyright 2019 TRENDnet. All Rights Reserved.
Based on the example, the network settings will be the following:
12. For the DPD setting, select Enable.
TWG-431BR
53