TRENDnet TWG-431BR User Manual page 29

TRENDnet User's Guide
OSPF (Open Shortest Path First)
Advanced > IP Routing Setup / Advanced > IP Routing Rule Setup
1. Log into your router management page (see
on page 7).
2. Click on Advanced and click on IP Routing Setup.
3. Review the OSPF Routing section.
• Service: Check Enable to enable the OSPF routing protocol.
• Router ID: Click the drop-down and select which interface IP to assign as the
OSPF router ID.
• Distribute RIP over OSPF: If you are using both RIP and OSPF dynamic routing
protocols at the same time, this option will distribute RIP routes over OSPF
protocol to other OSPF enabled devices.
Under OSPF network settings, check the network interfaces to enable OSPF and enter
the Area ID.
© Copyright 2019 TRENDnet. All Rights Reserved.
"Access your router management page"
TWG-431BR
21