TRENDnet TWG-431BR User Manual page 56

TWG-431BR
TRENDnet User's Guide
5. In the Remote Start/End IP Address fields, enter an IP address range (within the same
Local IP Address subnet range) to assign to L2TP VPN clients.
In this example, we assigned 192.168.80.1 as the Local IP Address for the L2TP server so
we will assign a range such as 192.168.80.10-192.168.80.20.
10. Click Save at the bottom. Then click Reboot at the top right to commit the changes.
6. Click Save at the bottom.
7. Click on System, click on PPTP/L2TP Account Setup, and click Create Account.
8. Under Account Setup, enter the User Name and Password for the L2TP account.
(e.g. User1)
9. Under Routing Rule, enter the Local Subnet the remote L2TP VPN clients will be
allowed to access and click Add to add to the Routing Rule List. (e.g. 192.168.10.0/24)
Note: If you want allow L2TP VPN clients to access any local subnet, you can leave the
Local Subnet settings as 0.0.0.0/0 and click Add.
© Copyright 2019 TRENDnet. All Rights Reserved.
48