TRENDnet TWG-431BR User Manual page 13

TRENDnet User's Guide
15. Click Save at the bottom of the page.
Note: After click Save, the changes you made to the router will not take effect until you
reboot the unit. You can also make additional changes, then save and reboot once you
have completed all configuration changes. To save all configuration changes and reboot,
click Reboot at the top right corner and click the Reboot button.
16. Click the System tab at the top, then click WAN Setup.
© Copyright 2019 TRENDnet. All Rights Reserved.
17. The WAN1 interface of the router is set to Dynamic IP (also known as DHCP) by
default. To change the WAN1 Internet connection settings, click the Edit button in the
column on the right.
18. Under WAN settings, select the appropriate mode for your Internet connection
Dynamic IP, Static IP, and PPPoE. If you are unsure of the connection mode, please
contact your ISP.
19. After you have selected the appropriate mode and entered your settings, click Save
at the bottom of the page.
TWG-431BR
5