Download Print this page
TRENDnet TWG-BRF114 Quick Installation Manual
TRENDnet TWG-BRF114 Quick Installation Manual

TRENDnet TWG-BRF114 Quick Installation Manual

Cable/dsl 4-port gigabit firewall router
Hide thumbs Also See for TWG-BRF114:

Advertisement

Quick Links

Quick Installation Guide
TWG-BRF114

Advertisement

loading

Summary of Contents for TRENDnet TWG-BRF114

  • Page 1 Quick Installation Guide TWG-BRF114...
  • Page 2: Table Of Contents

    Table of Contents Table of Contents English ... 1. Before You Start 2. Hardware Installation ... Configure the Router ... Troubleshooting ... Version 08.30.2007...
  • Page 3: English

    PC Card (TEG-PCBUSR) Gigabit Package Contents WG-BRF114 Quick Installation Guide User's Guide CD-ROM 1 x RJ-45 Ethernet Cable Power Adapter (12V, 800mA) (TWG-BRF114) 1-Port 10/100Mbps Multi-Function USB 2.0 Print Server (TE100-MP1U) 10/100Mbps English Wireless Access Point (TEW-630APB) Workstation with Gigabit PCI Adapter...
  • Page 4: Hardware Installation

    LAN ports. Connect the other end of the cable to the computer's Ethernet port. 4. Connect the AC Power Adapter to the TWG-BRF114 and then to a power outlet. 5. Verify that the following panel lights are on: Power, LAN and WAN.
  • Page 5: Configure The Router

    3. Configure the Router 1. Open your web browser, type http://192.168.0.1 in the Address bar, and press Enter. 2. Click Setup Wizard. 3. Click Next. 4. Select the type of Internet access that you have and then click Next. English...
  • Page 6 Follow the wizard instructions to complete the configuration. Your configuration is now complete. For detailed information regarding the TWG-BRF114's configuration and advanced settings, please refer to the Troubleshooting section, User's Guide CD-ROM, or TRENDnet's website at http://www.trendnet.com. To ensure the highest level of customer service and support, please take a moment to...
  • Page 7: Troubleshooting

    I typed http://192.168.0.1 in my Internet Browser's Address Bar, but an error message says “The page cannot be displayed.” How can I get into the TWG-BRF114's web configuration page? First, check your hardware settings again by following the instructions in Section 2.
  • Page 8 Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.
  • Page 9 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.trendnet.com/register 20675 Manhattan Place Torrance, CA 90501 Copyright ©2007. All Rights Reserved. TRENDnet.