Iharmony Zoning (S30 Only Feature); Notifications (Reminders Only); Energy Savings; Enable Energy Savings - Lennox iComfort E30 User Manual

iHarmony Zoning (S30 Only Feature)

This section is applicable only to iComfort S30 controlled systems that have
the iHarmony zoning system installed. Works only with Lennox communicating
systems.
This option will only appear on the menu if an iHarmony
installed.
1. Zoning: This section allows the user to turn ON or OFF zoning. If zoning is
automatically detected by the system, the default is ON.
2. Zones 1 through 4: Pressing on the right arrow will bring up a screen so
that each zone can be renamed if desired.
For more information concerning iHarmony zoning operation, see "iHarmony
Zoning Operations (S30 Only Feature)" on page 21.

Notifications (Reminders Only)

This section allows the user to setup reminders for various accessories. By
default all listed items are disabled. The reminders can be set for 3, 6, 12 or 24
months and a custom reminder by specific date can be set. Reminders options
are:
• Replace Filter 1 or Replace Filter 2
• Replace UV bulb
• Replace humidifier pd
• PureAir maintenance
• Maintenance reminder.

Energy Savings

NOTE: This feature requires thermostat firmware version 3.60.xxx or higher.
Go to menu > settings > general > about to verify your thermostat
firmware version.
Energy Savings feature is currently a feature requirement for the State of
California. Enrolling into the energy saving program will allow your utility
company to control your thermostat during peak energy events. An icon on the
home page will indicate when the system is in an active energy savings event.
Enrollment is a two-step process for consumers. The first step requires the
consumer to register with their utility provider before the thermostat settings
can be enabled to take advantage of the Energy Savings feature.

Enable Energy Savings

Go to Menu > Settings > Energy Settings and turn on enable energy savings.
This will automatically get the required certification for your thermostat.
zoning system is
®
®
NOTE: If enabling energy savings is successful or not successful a pop-up
screen will appear indicating either. If unsuccessful, try again in a few
minutes.

Enroll in Energy Savings

The next screen will allow you to enroll in energy savings. Follow the on-screen
prompts to continue. Detail on-screen instructions are provided.
1. Select enroll energy savings.
2. Type in the web address for your energy savings provider, for example
https://vtn.com and select done. A progress pop-up screen will appear.
15
System
energy savings
settings
wi-fi local
Please visit your enrgy provider websitre to get a registration url,
and the press enroll. You may be asked to provide a registration code.
name upstairs
enroll energy savings
away on
on
Feels Like
fan auto
registration code
ventilation auto
energy savings provider
heat & cool
enrollment status
humidity
iHarmony zoning
energy savings settings
notifications
advanced settings
energy savings
general
display
home info
account
HomeKit
Figure 13. Enabling Energy Savings
System
energy savings
settings
wi-fi local
cancel Please visit your energy provider website to get a registration URL,
energy savings enrollment
and then press enroll. You may be asked to provide a registration code.
name upstairs
https://vtn.com
away on
Feels Like on
auto
fan
ventilation auto
heat & cool
humidity
iHarmony zoning
notifications
advanced settings
energy savings
general
display
home info
Figure 14. Enrollment URL
account
HomeKit
>
>
done