Generate Pin; Move Out; Homekit; Notifications (Critical, Warnings And Reminders) - Lennox iComfort E30 User Manual

If the setup and connection to the Lennox server is successful, a green check
mark will appear above the server icon under the Wi-Fi menu option.

Generate Pin

If you have already created a consumer account through the consumer web
portal (www.lennoxicomfort.com) then you can use the generate pin option to
add your system to your account.
NOTE: The generate pin option is not required if the account is setup from the
thermostat .
1. Create your account using either the iComfort Thermostat App or consumer
website (www.lennoxicomfort.com).
2. The first time you login to your account the screen will indicate no iComfort
detected. Select the ▼ icon next to your email address in the upper right-
hand side of the screen. A drop down menu will appear and select add
icomfort.
3. A add icomfort pop-up window will appear on the screen. Enter your pin
number which was generated by the thermostat and press add. When
successful, the setup will continue on to the next applicable screen.
4. If you have already associated an address to your account, you will have
the option to select that address or add a new address.

Move Out

Using "move out" function will remove all addresses and thermostat systems
associated with your account.
To remove just one system, go to that system and navigate to menu > name
and select "unregistered system."
NOTE: The move out function does not delete your account but just removes
all systems and addresses.

HomeKit

See section "Apple HomeKit Integration" on page 24 for information on how
to add your thermostat to Apple HomeKit.

Notifications (Critical, Warnings and Reminders)

Table 5. Notification Types
Notification
Color
Type
Critical Red
Warnings Orange
Reminders Yellow
Info Blue
NOTE: Selecting the ALL option displays all of the above.
Table 6. Reminders (Service Alerts)
Number Reminder
3000 Filter 1
3001 Filter 2
3002 Humidifier Pad
3003 UV Light
3004 Maintenance
3005 PureAir Maintenance
4001 User Wi-Fi state change, disable
4002 Firmware download failed
4003 Image file download failed
19
What it means
Indicates something has malfunctioned and needs immediate
attention. Contact your service technician.
Indicates an emerging or developing issues that will require
attention. One example is excessive run times. Contact your
service technician.
Indicates filter, UVA light replacement or maintenance is
needed, based on run time or calendar schedule. See table
2 service codes.
Indicates various system modes, for example away mode.