Lennox iComfort E30 User Manual page 6

Table 1. Home Screen and System Status Icons
Icon Screen Text
Transitioning to
next schedule
Schedule
hold until next
period.
F. Away: Smart Away is used to set the temperature while the home is
unoccupied. Default low temperature setting of 62°F (16.5°C) and high
temperature setting of 85°F (29.5°C) . See "Away" on page 10 for further
details.
NOTE: Smart away will be canceled when the system is enrolled in energy
savings with a utility provider and a energy saving event is active.
G. Pressing on the heat-to area will allow the temperature setting to be
changed.
H. Pressing on the cool-to area will allow the temperature setting to be changed.
NOTE: If the system is running on a schedule, any adjustment will display
schedule will hold until next period or select duration of hold. Touch
hold or duration to select the desired time. The hold period can be
canceled by pressing the cancel icon on the right side of the Home
Screen.
I. Select Mode: Touch modes/schedules to select the system mode of
operation, run a schedule, fan mode operation and turn the system off. To
exit this screen, press the home icon.
"Figure 3. Select Mode" shows the various modes of operation that may
be available. To select a mode for the system or a specific zone, press
the desired operation. The gray shaded area indicates the item has been
selected.
NOTE: Options are dependent on system configuration. For example, emerg
heat will be auxiliary heat for heat pump systems only.
Purpose
The system is following an active schedule and is
transitioning to the next temperature setting based on
a time indicator.
Along with this icon is the option to cancel the schedule
hold.
cool only
Figure 3. Select Mode
• Off: System is off. In addition, if system is off, Alexa will be unable to adjust
the temperature.
• Cool Only: System will run only in cool mode.
• Heat Only: System will run only in heat mode.
• Heat • Cool: This is the auto-changeover mode. System will heat or cool
your home at the temperature set point you desire.
• Emergency Heat: Selecting this setting will run the air handler's electric
heat or furnace instead of the heat pump for heating. This selection is only
available with systems using a heat pump.
• Fan Operations: There are three fan modes of operation, which are auto, on
and circulate. Pressing on the fan icon will allow selection of the desired fan
mode. See "Table 1. Home Screen and System Status Icons" on page 4
for icon appears and fan behavior for each mode.
• Schedules: When selecting schedules, the available options are Schedule
IQ, summer, winter, spring/fall and save energy. Schedules are all predefined
and can be changed or renamed by selecting edit schedules. For summer,
winter, spring/fall and save energy schedules, each time setting and
specific fan operation can be set as well. Options are on, auto and circulate.
Other functions are rename the schedule and restore defaults. Press the
home icon to exit the screen or after no activity for 25 seconds the system
will return you automatically to the home screen.
NOTE: Any adjustments made to the schedule are automatically saved.
6
heat only
heat / cool
emerg heat
select mode
schedules
auto