Setting Call Forward From The Netset Utility - 3Com 3102 User Manual

54 C 5: S
HAPTER TANDARD
Setting Call Forward
from the NetSet
Utility
F
EATURES
4 If the telephone number you want was entered previously and displays,
press # to accept it. Otherwise, enter the telephone number to forward
calls to and press #.
To cancel Call Forward All from the display panel:
1 Scroll to CFWD ALL on the display panel.
2 Press the Set soft button to select CFWD ALL.
3 Press the Set soft button again to select Cancel CFWD ALL.
From the NetSet utility, you can set default call forwarding or choose to
override the default with a condition for call forwarding (No Answer,
Busy, or All) and a destination. For telephone numbers, do not use
parentheses, hyphens, or spaces. When you specify an external telephone
number, start by entering a 9 or 8 or whatever is required to access an
outside line. Example: 912815551212 dials (281) 555-1212. You can
enter a * if a pause is required between an access code and a destination
number.
Default
The Call Forward Default page defines basic call forwarding. You
choose from four destinations: voicemail box, a phone number, the
automated attendant, or disconnection. You can override these settings
on the Call Forward Override page or by making changes on the
telephone.
To set the default call forwarding:
1 Log in to NBX NetSet > User Information > Call Forward Default.
2 Select your choice for the Number of rings before forwarding a call.
3 Select a call coverage point:
If you select Forward to voicemail box, the caller can leave a
message.
If you select Forward phone number, enter that extension or
external phone number in the box.
The number that you choose may be limited by your call permissions. To
view your permissions, see NBX NetSet > User Information > Call
Permissions.