Do Not Disturb - 3Com 3102 User Manual

Do Not Disturb

When the Do Not Disturb feature is in effect, calls coming in to your
telephone immediately go to your default call coverage point without
ringing. You set the default call coverage point by logging in to NBX
NetSet > User Information > Call Forward Default. See
Incoming Calls" in
If Call Forward All is in effect, it overrides Do Not Disturb. Calls go to the
call coverage point defined for Call Forward All in NBX NetSet > User
Information > Call Forward Override.
You can ask your administrator to map the Do Not Disturb feature to an
available Access button on your 3Com Telephone, or you can use the
Feature Code to enable and disable the feature.
When Do Not Disturb is in effect:
It overrides Call Forward No Answer, Call Forward Busy, and FWD
MAIL.
Your telephone does not ring when it receives an incoming call.
The associated status light does flash when a call arrives.
You can use the telephone to dial outgoing calls.
You can use the telephone to dial internal and external pages.
a 3Com Business Telephone or 3Com Manager's Telephone does not
broadcast incoming paging messages over the speaker.
If your telephone is part of a call pickup group, no other telephone in
the pickup group can retrieve a call that comes directly in to your
telephone. The incoming call goes immediately to the call coverage
point (voice mail, auto attendant, or other extension).
If your telephone is part of an ACD group, a hunt group, or a calling
group, incoming calls to the group ring on your telephone. Calls
coming in directly to your telephone (not directed to the group) do
not ring on your telephone. To prevent every call from ringing, you
must enable Do Not Disturb and also log out of the group.
To enable and disable Do Not Disturb using the feature code:
1 Pick up the handset and press Feature + 446.
2 Hang up. Your telephone is now in Do Not Disturb mode. The display
panel on a 3Com Telephone shows DO NOT DISTURB.
Chapter 5.
Do Not Disturb 73
"Forwarding