Putting A Call On Hold; Dialing Another Call; More Than One Call - 3Com 3102 User Manual

Putting a Call
on Hold

Dialing Another Call

More Than One Call

If no call forwarding settings are enabled, all calls received this
extension is busy are immediately forwarded to the Call Forward
Default destination. If this extension is not busy, all calls are forwarded
to the Call Forward Default destination after the number of rings
specified in the Call Forward Default page of the NetSet utility.
You can put a call on hold for any reason.
On 3Com Business Telephones:
1 Press the Hold button.
2 To return to the call, press the appropriate Access button.
You can place a call on hold to dial a new call,
On 3Com Business Telephones:
1 Press the Hold button.
2 Press one of the Access buttons that is currently not being used.
3 When you hear dial tone, dial the second call.
The number of simultaneous calls that you can have on your 3Com
Telephone is limited by the number of Access buttons that are defined for
your extension. The default is the bottom three buttons in the column of
Access buttons on the left of the 3102 Business Telephone and the
bottom three Access buttons in the column on the right on the 1102,
2102, or 2102-IR Business Telephones. Your administrator can verify the
number and location on your telephone.
To place more than one call on hold on a 3Com Business Telephone:
1 To place the current call on hold, press the Hold button.
To make a call, press one of the Access buttons that is currently not
being used. When you hear dial tone, dial the call.
To receive a call, locate the flashing status light that indicates the
incoming call and press the associated Access button.
2 To place the new call on hold, press Hold.
3 To return to either call, press the appropriate Access button.
4 To place or receive another new call, repeat the previous steps.

Putting a Call on Hold

57